We Pressure Formed these automated handwashing stations for our customer, Meritech. Meritech developed these hand sanitizing systems, which have been clinically proven to remove more that 99.9% of harmful pathogens. The process takes approximately 12 seconds, and uses 75% less water than a traditional sink. Initially, we decided that the pressure forming was the appropriate process … Read more
We chose the Twin Sheet forming process to form this door for a robotic tape library for Quantum. See the iScalar 6000 series here. When the project began, volumes were relatively small. Due to small volumes, the customer decided to go with the Reaction-Injection Molding process to minimize tooling costs. The Reaction-Injection process has a … Read more
Pressure Forming Process Used for Hospital Bed System We chose the pressure forming process to manufacture the MediGLIDER™ patient transfer system. This innovative patient transfer system was developed by ConMediSys. This lateral transfer system eliminates the need for heavy lifting in patient transfer. As patient transfers are a leading cause of workplace injury in hospitals and other … Read more
Pressure Forming Offers Just Enough Detail for This Exercise Enclosure We assemble this pressure formed enclosure from 4 female, pressure-formed parts. Initially, we mold undercuts around the perimeter, thus ensuring uniform mating of various parts. In addition, we have molded in an aggressive texture, using a HIPS material.
Twin Sheet Insulated Lid For Use in Clean Energy We manufacture this large insulated lid using the twin-sheet forming process. Ice Energy uses this approximately 6′ x 6′ part, as an insulated lid for an ice making machine. This machine is then used to generate air-conditioning coolant during peak usage hours with ice made from electricity in off-peak … Read more
Control Bezel Manufactured with Pressure Form Process We manufactured this pressure-formed using a female mold. We were able to achieve very sharp radii, formed in texture, and male and female undercuts to create a “snap-in” functionality. Created for: Johnson Controls
Vacuum Forming Great Fit in the Clean Energy Industry In response to increasing demand for commercial rooftop solar applications, we used the vacuum forming process to help develop this solar panel. We were approached by Johns Manville (JM) in 2010 to collaborate in developing a thermoformed roof solar panel mounting system. JM asked us to help provide … Read more
Associated Thermoforming, Inc.
We are the Experts in Custom Plastics Thermoforming.
